Three-phase D-STATCOM prototype.

Autores/as

  • Mauricio José Triana Figueroa Universidad De Pamplona
  • Jorge Luis Diaz Rodriguez Universidad De Pamplona
  • Aldo Pardo Garcia Universidad De Pamplona

DOI:

https://doi.org/10.18687/LACCEI2025.1.1.2230

Palabras clave:

D-STATCOM, FACTS, PLL, fuzzy, synchronization

Resumen

This work deals with the design and implementation of a D-STATCOM prototype, designed to compensate the power factor to an optimal value. Initially, the design was based on previous research and to improve its performance additional functions were introduced. Control strategies were designed, tested and implemented. The results of the connection to the power line at full load were tested. Finally, the results demonstrate the relationship between increasing the inverter stage of the prototype above the power line, obtaining a variable capacitor that adjusts the power factor.

Descargas

Publicado

2025-07-27

Número

Sección

Articles

Licencia

Licencia Creative Commons

Esta obra está bajo una Licencia Creative Commons Atribución-NoComercial-CompartirIgual 4.0 Internacional.

LACCEI conserva el copyright de todos los artículos publicados bajo los términos de su acuerdo de transferencia de copyright. Como titular del copyright, LACCEI distribuye los artículos al público bajo la Licencia Internacional Creative Commons Atribución-NoComercial-CompartirIgual 4.0 (CC BY-NC-SA 4.0).

Cómo citar

Triana Figueroa, M. J., Diaz Rodriguez, J. L., & Pardo Garcia, A. (2025). Three-phase D-STATCOM prototype. LACCEI, 1(12). https://doi.org/10.18687/LACCEI2025.1.1.2230

Artículos más leídos del mismo autor/a