Develop of an D-STATCOM prototype connected to the electrical power line
DOI:
https://doi.org/10.18687/LACCEI2024.1.1.1357Keywords:
D-STATCOM, FACTS, PLL, fuzzy, synchronization.Abstract
This paper deals with the design and implementation of a D-STATCOM prototype. It was designed in order to compensate the power factor to an optimal value. Initially, the design was base on previous research and to improve its operation aditional functions was introduced. The control strategies was design, tested and implemented. The results of the connection to the electrical power line at full load was test. Finally, the results demonstrate the relationship between the increase of the inverter stage of the prototype above the electrical power line, obtaining a variable capacitor thus adjusting the power factor.
Downloads
Published
2024-07-27
Issue
Section
Articles
Copyright
Copyright (c) 2024 LACCEI
License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
LACCEI retains copyright of all published articles under the terms of its copyright transfer agreement. As the copyright holder, LACCEI distributes the articles to the public under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0).
How to Cite
Triana Figueroa, M. J., Diaz Rodriguez, J. L., & Pardo Garcia, A. (2024). Develop of an D-STATCOM prototype connected to the electrical power line. LACCEI, 1(10). https://doi.org/10.18687/LACCEI2024.1.1.1357