Three-phase D-STATCOM prototype.

Authors

  • Mauricio José Triana Figueroa Universidad De Pamplona
  • Jorge Luis Diaz Rodriguez Universidad De Pamplona
  • Aldo Pardo Garcia Universidad De Pamplona

DOI:

https://doi.org/10.18687/LACCEI2025.1.1.2230

Keywords:

D-STATCOM, FACTS, PLL, fuzzy, synchronization

Abstract

This work deals with the design and implementation of a D-STATCOM prototype, designed to compensate the power factor to an optimal value. Initially, the design was based on previous research and to improve its performance additional functions were introduced. Control strategies were designed, tested and implemented. The results of the connection to the power line at full load were tested. Finally, the results demonstrate the relationship between increasing the inverter stage of the prototype above the power line, obtaining a variable capacitor that adjusts the power factor.

Downloads

Published

2025-07-27

Issue

Vol. 1 No. 12 (2025): LACCEI 2025

Section

Articles

Copyright

Copyright (c) 2025 LACCEI

View LACCEI official copyright policy

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

LACCEI retains copyright of all published articles under the terms of its copyright transfer agreement. As the copyright holder, LACCEI distributes the articles to the public under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0).

How to Cite

Triana Figueroa, M. J., Diaz Rodriguez, J. L., & Pardo Garcia, A. (2025). Three-phase D-STATCOM prototype. LACCEI, 1(12). https://doi.org/10.18687/LACCEI2025.1.1.2230

Most read articles by the same author(s)