Develop of an D-STATCOM prototype connected to the electrical power line
DOI:
https://doi.org/10.18687/LACCEI2024.1.1.1357Palabras clave:
D-STATCOM, FACTS, PLL, fuzzy, synchronization.Resumen
This paper deals with the design and implementation of a D-STATCOM prototype. It was designed in order to compensate the power factor to an optimal value. Initially, the design was base on previous research and to improve its operation aditional functions was introduced. The control strategies was design, tested and implemented. The results of the connection to the electrical power line at full load was test. Finally, the results demonstrate the relationship between the increase of the inverter stage of the prototype above the electrical power line, obtaining a variable capacitor thus adjusting the power factor.
Descargas
Publicado
2024-07-27
Número
Sección
Articles
Derechos de autor
Derechos de autor 2024 LACCEI
Licencia
Esta obra está bajo una Licencia Creative Commons Atribución-NoComercial-CompartirIgual 4.0 Internacional.
LACCEI conserva el copyright de todos los artículos publicados bajo los términos de su acuerdo de transferencia de copyright. Como titular del copyright, LACCEI distribuye los artículos al público bajo la Licencia Internacional Creative Commons Atribución-NoComercial-CompartirIgual 4.0 (CC BY-NC-SA 4.0).
Cómo citar
Triana Figueroa, M. J., Diaz Rodriguez, J. L., & Pardo Garcia, A. (2024). Develop of an D-STATCOM prototype connected to the electrical power line. LACCEI, 1(10). https://doi.org/10.18687/LACCEI2024.1.1.1357