Comparison of compressive stresses in masonry pieces and prisms with the CHOC of Honduras
DOI:
https://doi.org/10.18687/LACCEI2023.1.1.929Palabras clave:
prism, piece of masonry, masonry, Compression efforts, axial compressionResumen
In the research below, an analysis is presented that has the different prisms and pieces of masonry to the compression efforts and axial compression. In order to compare the relationship between them. The process was carried out selecting different samples of both elements. These were taken to a laboratory where the different compressive stress and axial compression tests were performed. The result of the graphs shows that the stresses found in the piece-masonry are greater than those shown by the CHOC-08 equations. It is concluded that the materials used in Honduras for the prism are oversized, so it is recommended to continue carrying out tests to validate the data of the Honduran construction code.
Descargas
Publicado
2023-07-27
Número
Sección
Articles
Derechos de autor
Derechos de autor 2023 LACCEI
Licencia
Esta obra está bajo una Licencia Creative Commons Atribución-NoComercial-CompartirIgual 4.0 Internacional.
LACCEI conserva el copyright de todos los artículos publicados bajo los términos de su acuerdo de transferencia de copyright. Como titular del copyright, LACCEI distribuye los artículos al público bajo la Licencia Internacional Creative Commons Atribución-NoComercial-CompartirIgual 4.0 (CC BY-NC-SA 4.0).
Cómo citar
Rodríguez, Ada S, Salinas, Jorge A, & Ordoñez, Rosa Alba. (2023). Comparison of compressive stresses in masonry pieces and prisms with the CHOC of Honduras. LACCEI, 1(8). https://doi.org/10.18687/LACCEI2023.1.1.929