Comparison of compressive stresses in masonry pieces and prisms with the CHOC of Honduras
DOI:
https://doi.org/10.18687/LACCEI2023.1.1.929Keywords:
prism, piece of masonry, masonry, Compression efforts, axial compressionAbstract
In the research below, an analysis is presented that has the different prisms and pieces of masonry to the compression efforts and axial compression. In order to compare the relationship between them. The process was carried out selecting different samples of both elements. These were taken to a laboratory where the different compressive stress and axial compression tests were performed. The result of the graphs shows that the stresses found in the piece-masonry are greater than those shown by the CHOC-08 equations. It is concluded that the materials used in Honduras for the prism are oversized, so it is recommended to continue carrying out tests to validate the data of the Honduran construction code.
Downloads
Published
2023-07-27
Issue
Section
Articles
Copyright
Copyright (c) 2023 LACCEI
License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
LACCEI retains copyright of all published articles under the terms of its copyright transfer agreement. As the copyright holder, LACCEI distributes the articles to the public under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0).
How to Cite
Rodríguez, Ada S, Salinas, Jorge A, & Ordoñez, Rosa Alba. (2023). Comparison of compressive stresses in masonry pieces and prisms with the CHOC of Honduras. LACCEI, 1(8). https://doi.org/10.18687/LACCEI2023.1.1.929