Optimization of hot water consumption in a vacuum tube solar water heater pilot using PID control and IoT-based monitoring
DOI:
https://doi.org/10.18687/LACCEI2026.1.1.2577Keywords:
solar thermal energy, IoT, PID control, energy efficiency, vacuum tubesAbstract
Abstract– Manual control of water mixing in solar water heating systems compromises efficiency and limits hot water availability. This project develops a PID control system for optimal water tempering, integrating sensors and mixing actuators into a vacuum tube solar collector pilot. The objective is to optimize hot water consumption through real-time IoT-based monitoring, thereby increasing the available volume of tempered water at the desired setpoint. The thermal system is modeled, the controller is designed, and its performance is validated against manual operation. Results demonstrate an approximate 20% improvement in operational efficiency and user comfort, achieving a 150% expansion of the useful volume by delivering 300 liters of water at 37°C from a 120-liter tank.
Downloads
Published
2026-07-27
Issue
Section
Articles
Copyright
Copyright (c) 2026 LACCEI
License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
LACCEI retains copyright of all published articles under the terms of its copyright transfer agreement. As the copyright holder, LACCEI distributes the articles to the public under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0).
How to Cite
Legua Gutierrez, C., Ortiz-Vidal, E., & Cuisano, J. (2026). Optimization of hot water consumption in a vacuum tube solar water heater pilot using PID control and IoT-based monitoring. LACCEI, 1(14). https://doi.org/10.18687/LACCEI2026.1.1.2577